The MPE series circuit breakers also offer a comprehensive range of accessories for diverse applications, including control, signaling, and enhanced protection.
- Auxiliary Contact Blocks:
- Front mountable (ACBFE-11, ACBFE-20): These have 1NO+1NC contacts. They are designed so that the MPE width remains unchanged when installed.
- Left side mountable (ACBSE-11, ACBSE-20): ACBSE-11 provides 1NO+1NC, while ACBSE-20 provides 2NO. These can be combined with front mountable auxiliary contact blocks.
- Trip Indicating Contact Block:
- TSBE: Provides 1NO + alarms and 1NC for each circuit. It offers separate tripped and short-circuit indication. It is mounted on the left side and allows for mounting with lateral auxiliary contact blocks.
- Shunt Release:
- SRMPE-Z20: Operates with actuating voltages of 200-240V AC. The pick-up voltage is 0.7 times the rated voltage (Ue). It is mounted on the right side.
- Undervoltage Release:
- URMPE-N for 230-240V AC and URMPE-U for 400-415V AC. These are mounted on the right side.
- Insulated Enclosures (IP55):
- MPEE55G and MLPEE55G, with "E" variants MPEE55G-E and MLPEE55G-E.
- Available with black/grey rotary handles. These include an integrated PE(N) terminal, can be locked in the OFF position with 3 padlocks, and have two M25 metric cable entry knockouts at the top and bottom.
- Also available with red/yellow rotary handles. These are suitable for use as Emergency-Stop switches according to IEC/EN 60204, and also feature an integrated PE(N) terminal, lockability in the OFF position with 3 padlocks, and two M25 metric cable entry knockouts.
- Neutral Terminal:
- NL-MPEE: Designed for the connection of a 5th conductor.
- Flush Mounting Enclosures (IP55):
- FMEE55 (black) and FMEE55-E (red/yellow).
- Designed for MPE mounting on a panel door. They feature a moulded plastic front plate with a rotary operating mechanism, are lockable in the OFF position, and allow for the installation of accessories like ACBFE-11, ACBSE-11/ACBSE-20, URMPE/SRMPE, and signal lamps.
- Indicator Lights:
- Available in red (PLE230, PLE400), green (PLE230G, PLE400G), and white (PLE230W, PLE400W).
- Voltage options include 210-230V and 400-560V.
- Door Coupling Rotary Handle (IP55):
- RMMPE130 and RMMPE330 (black/grey).
- RMMPE130E and RMMPE330E (red/yellow).
- Features an extension shaft (lengths 130-155mm or 330-355mm, cuttable to a minimum of 80mm).
- Supports panel door thickness of 1 to 3.5mm.
- Suitable for use as a main switch (IEC/EN60204), indicating ON/OFF/Tripped positions.
- Can be locked in the OFF position with 3 padlocks, and the MPE can also be used when turned 90 degrees.
- Circuit Breaker-Contactor Link Module:
- ECCMPE07 (for CE07) and ECCMPE25(for CEM9…25 contactors).
- Provides electrical and mechanical linking between the MPE25 motor protective circuit breaker and a contactor.
- Note: The ECCMPE25 is specifically for contactors with AC coil only.
Izdvojeno
